Accufast Kt Tabber Manual
This listing is for a three part system. The buyer will receive: an Accufast XL Labeler with Stamp Affixer (and stand) an Accufast KT 1' Tabber. Manuals; Training and. Accufast Parts. Accufast XL parts. KT KT2 Tabber Spare Parts. Automecha Accufast Parts. Accufast KT Tabber Take Up Oring 02-1592-00 $ 4.80. Mail equipment you can count on! The Accufast KT Tabber mailing machine uses crash technology to seal and secure your direct mail and booklets.
Both units are known as crash tabbers in which the edge of the piece to be tabbed is fed into the machine first. That edge contacts the tab which has fed down in front of the piece, pulling the tab from its backing paper. The tab and the piece then crash into a sweep and roller system that folds the tab neatly and tightly to the piece. Advantages of Crash Tabbers: • High productivity.
The shortest dimension feeds through the machine increasing production rates at any given speed. • Simplicity. Short paper path with no skewing adjustment etc.
Tabs fold tight to the edge of the piece and do not drift from left to right. • Ideal for off line application. KT Technical Specifications • applies 1 tab per piece • tabs 15,000 pieces per hour • tabs pieces 5” to 12” wide, from 20 lb. Thin to 1/4” thick, coated and uncoated • runs a variety of 1 and 1.5 inch tabs: paper & clear, circles & rectangles, on rolls with or without tractor holes • built-in waste take-up spool • 5,000 one inch and 4,000 1.5 inch tabs per roll. • weighs 47 pounds • measures 10”l x 17”h x 21”w • uses 115 volts 2 amps 60 hz or230 volts 1 amp 50 hz • goes in-line with ACCUFAST and other tabletop Labelers, Feeders and Printers • its outstanding feature is its ability to run both 1 and 1.5 inch tabs at the flick of a switch. KT2 Technical Specifications • applies 1 or 2 tabs per piece • tabs 15,000+ pieces per hour • tabs pieces 5” to 16” wide, from 20 lb.
Thin to 1/4” thick, coated and uncoated • runs a variety of 1” tabs: paper & frosted, circles & rectangles, on rolls without tractor holes • built-in waste take-up spools • weighs 56 pounds • measures 11”l x 19”h x 23”w • uses 115 volts 2 amps 60 hz or 230 volts 1 amp 50 hz • goes in-line with ACCUFAST and other tabletop Labelers and Printers • its outstanding feature is a pairof independent tabbing heads – turn them both on to twin tab, turn only one on to single tab. Installing A New Bathtub.
The Accufast ET is a tabbing machine that has more uses than we have space to explain them. The essence of the ET is that it tabs both booklets and self mailers with the appropriate tabs in the correct spots automatically. Very little set up and operator interaction is required. The Accufast ET uses digital technology to place tabs per the USPS regulations. All the operator needs to do is light the location for each tab on the piece and run the pieces.
The ET automatically determines the size of the piece and puts the tab right where it is supposed to be. To move a tab, select the tab and press the lead or trail light to bump the tab into position. Once tab location is set, it stays until you move it again. Tabs are usually supplied to the ET in high volumes from a box of fan folded tabs located on the floor below the machine. Paloma Tankless Water Heater Parts. This eliminates much of the handling of tabs. Just splice one stack of tabs to the next and run the whole thing, stopping for a few seconds occasionally to clear the waste paper spool.